servo motor cnc wire cut edm FR-600G New Design
Medium Speed Wire Cutting Machine Standard Configuration:
1) Window XP System with Auto-CAD software control System.
2) PANASONIC converter ( Japan Panasonic )
3) "C" Structure HTK Casting Machine Body ( Japan HTK )
4) Standard DRO and Z axis motorized drive up and down.
5) Hiwin brand linear guide way install on XYZUV 5 axis ( P lever )
6) Hiwin brand ball screw install on XYZUV 5 axis ( C3 lever )
7) Automatic center lubrication system. (Not manual )
8) LED Inside light (Not outside bulb)
9) Automatic double direction wire tension system
Cooperate Suppliers:
Linear guide way and ball screw supplier (HINWIN Taiwan)
Bearing supplier (NSK Japan )
Motor, Driver and Electric accessories supplier ( SIEMENS German)
Electric accessories supplier ( NCC Japan )
Transducer (converter) ( PANASONIC Japan)
Servo driver supplier ( YASKAWA Japan )
Handle Remote supplier (EUCHNER German )
Industrial control system supplier (PHILIPS Europe)
Medium Speed Wire Cutting Machine Featurers:
1) Parameter is not required to put in, Artificial Intelligence works out perfect parameter
immediately after putting in cutting thickness and wire diameter, Different accuracy based on different workers with different experience will be solved.
2) Roughness: Ra ≤0.8um
3) 3 Time Cutting thickness : ≥200mm
Factory Situation:
1). More than 1500 Sets Wire Cut Machine can be sold out in Chinese market each year.
2). Over 8000 sets EDM machines installed in China or other countries.
3). 8 steps checking for each machine by more than 25 QCS.
4). 20 years experience on EDM Machines (From 1997) , 300 employees.
5). 20 research personnel for developing new models or accessories.
Medium Speed Wire Cutting Machine Parameters
| Item |
unit |
FR-500G/M/S |
FR-600G/M/S |
FR-700G/M/S |
| Worktable size (L×W) |
mm |
580*770 |
680*940 |
720*1040 |
| Table travel(X×Y) |
mm |
350*500 |
400*600 |
450*700 |
| Max. work piece thickness |
mm |
250 |
300 |
300 |
| U.V axis |
mm |
20*20 |
20*20 |
20*20 |
|
Max. taper angle/plate thickness
|
degree/mm |
±6°/80mm G model
±12°/80mm M model
±6°/80mm S model
|
|
Motor type
|
step or servo |
G model Step motor
M model Step motor
S model Servo motor
|
| Wire diameter |
mm |
0.16-0.20 |
0.16-0.20 |
0.16-0.20 |
| Machine accuracy |
Octagon |
mm |
±0.005 |
±0.005 |
±0.005 |
| Angle |
mm |
0.012 |
0.012 |
0.012 |
| Roughness, thrice cutting |
um |
≤0.8 |
≤0.8 |
≤0.8 |
| Max. machining speed |
mm²/min |
200 |
200 |
200 |
| Machine dimensions(W×L×H) |
mm |
1300*1770*1880 |
1540*1920*2020 |
1730*2020*2080 |
| Machine weight |
Kg |
1700 |
2000 |
2300 |
| Controller dimensions(W×L×H) |
Mm |
600*800*1800 |
600*800*1800 |
600*800*1800 |
| Wire traveling speed |
m/min |
5-11 |
5-11 |
5-11 |
| Load of table |
Kg |
400 |
500 |
600 |
| Rated Power |
KVA |
3 |
3 |
3 |
| Water tank dimension(W×L×H) |
mm |
580*960*660 |
580*960*660 |
580*960*660 |
| Working reservoir capacity |
L |
150 |
150 |
150 |
Medium Speed Wire Cutting Machine Introduction
Considering the main problems existing in the old type Fast Speed wire cut machine such as low cutting precision, bad surface finishing and slow cutting speed, while the brass wire cut machine is much more expensive and difficult to learn, we develop the second generation Middle Speed Wire Cutting machine based on the technology from Brass wire cut machine, deeply improves the cutting precision, surface finishing (Ra≤0.8um), cutting speed to make the cutting life and technology almost same as brass wire cut machine. But the machine's purchase cost is much lower than brass wire cut machine, the operator who has a little experience of fast speed wire cut machine can use our machine immediately. Comprehensive efficiency is 2 or 3 time as fast speed wire cut machine.
Product Tags:
|
|
Servo Motor Medium Speed Wire Cutting Machine FR600G 400mm*300mm Table Travel Size Images
|
